TRACTION SPRAY - SAFETY NON-SLIP FLOOR COATING!

TRACTION SPRAY - Non-Slip Floor CoatingEasy-To-Use Indoor / Outdoor Aerosol Spray!

TRACTION SPRAY - Non-slip coating in an aerosol can. use indoors or outdoors to help prevent slippery surfaces. TRACTION SPRAY Non-Slip Coating is a textured epoxy solution designed to give a hard, durable, skid-resistant coating. The grit is effective, and prevents slips from wet and greasy floors common in restaurants and food service environments. Also use on loading docks, bathrooms, pools, steps, and access ramps.

DIRECTIONS FOR USE:
SURFACE PREPARATION:
Surface should be dry, clean, and free from contaminants such as dirt, oil, grease, wax, or mill scale. Aluminum surfaces should be primed with a wash primer, and wood should be primed with an oil-based primer.

APPLICATION:
Apply Speedy Clean® Sure Traction Non-Slip Coating in temperatures between 50 °F – 90 °F. The product dries to the touch in 10-20 minutes. Dries hard in 24 hours, depending on weather conditions. Allow to dry at least 24 hours before allowing foot traffic. This product is not recommended for garages or wood surfaces subject to standing water.

CLEANUP:
Use Thinner, Toluene, Xylene or Lacquer Thinner.

KEY BENEFITS:
Provides a safe, non-slip work space for employees – avoid slip-and-fall problems.
Ready-to-use in Aerosol or Liquid. No Mixing
Fast! Surfaces are ready for foot traffic in 24 hours.
Use on steel, fiberglass, wood, and treated aluminum.


SIZES:
Speedy Clean® Sure Traction Non-Slip Coating is available in 16 ounce aerosol cans and 5-gallon liquid pails for large jobs.

TIPS FOR USE:
Be sure to wear protective gloves and eye protection when applying. Be sure to apply Speedy Clean® Sure Traction Non-Slip Coating under the right conditions: Clean surface, 50 °F - 90 °F. Allow to dry for 24 hours before allowing foot traffic.

NOTES:
This product contains solvents and other chemical ingredients. Adequate health and safety procedures should always be followed. Aerosol can covers 15-20 square feet. A 5-gallon pail of product can cover up to 600 square feet.

ENJOY THESE BENEFITS:
• Use on slip resistant epoxy coatings
• Contains Synthetic Grit - No Sharp Edges
• Adheres to most surface types
• Durable - Wear and Chemical resistant
• Use Indors and Outdoors - Not harmed by UV light
• Easy-to-use aerosol

3 CONVENIIENT COLORS:
White • Gray • Clear

Available in 12 oz. Aerosol.

Sales Sheet

Technical Sheet

Material Safety Data Sheet

NON-SLIP FLOOR COATING IN AN AEROSOL SPRAY!!

News